DT80 Range FAQ
From dataTaker Wiki (FAQ)
DT80, DT80G, DT81, DT82E, DT85 and DT85G data loggers (Series 1 and 2) frequently asked questions.
General Information for the DT80 Range
- Mechanical Data
- Battery/Power Information
- Host Communications
- Web Interface
- FTP / Email Information
- Modem Logger Information
- Modbus Information
- Keypad and Display
- USB/Internal Storage Information
- Schedule Information
- DT80 Range Input Information
- Downloading data
- Real Time Clock
- Firmware Information
- Programming and Commands
- Developing Host Software
- Reading data with Microsoft Excel
- Emissions Testing
- R. M. Young Model 05103 Wind Monitor
- Vaisala WXT510 Weather transmitter – SDI-12
- McVan Analite 390 and 395 Turbidity probes - SDI-12
Error and Fault information from the logger
To assist with troubleshooting your application, the DT80 range loggers include a number of error checking and event logging functions. It is useful to obtain the data from the logger to help identify the more subtle problems that may occur. The two log files that are available;
- UERRLOG returns errors (exceptions/assertions).
- UEVTLOG returns contents of event log.
- SERVICEDATA returns a full service data report with extended diagnostics
These are best unloaded using the DeTransfer text interface or via the File menu on the browser interface, DeLogger can also be used but the data will be in Fixed Format and difficult for users to interpret.
Create a Service data report on USB
You can create a Service data report on your USB memory.
To do this, create an ONINSERT.DXC file on the root directory of the USB memory, with the following text.
SATTN; SERVICEDATA "A:\Service Report\Servicedata.txt"; REMOVEMEDIA; CATTN
This will turn on the Attention LED, create a file called "Servicedata.txt" under a "Service Report" directory, remove the USB memory stick, then turn of the Attention LED