 |
DT82EThe Environmental SolutionThe dataTaker DT82E is a smart data logger designed especially for environmental monitoring. The DT82E is a robust, ultra low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display. |
 |
DT82IThe Industrial SolutionThe dataTaker DT82I smart logger is a more affordable alternative to the DT80. While the DT82I has fewer inputs and is not expandable; it is functionally just as powerful as the DT80 or DT85. The DT82I is a low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display. |
 |
DT80Take the next step!The dataTaker DT80 is a smart data logger that provides an extensive array of features that allow it to be used across a wide variety of applications. The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. |
 |
DT85The Smarter SolutionThe DT85 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT85’s Dual Channel concept allows up to 32 isolated or 48 common referenced analog inputs to be used in many combinations. |
 |
DT80GGeoLoggerThe dataTaker DT80G is a smart data logger that provides an extensive array of features that allow it to be used across a wide variety of applications. |
 |
DT85GFor All Geotechnical ProjectsAdvanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT80G GeoLogger - A versatile, powerful – yet low power and cost effective data logger. |
 |
DT82EMData Directly to Your InboxThe dataTaker DT82EM is an ultra low powered logger with an integral 2G/3G modem. Have your data emailed directly to your inbox or get an SMS alarm sent to your mobile phone. deTermined® communications ensures your data gets through and nothing gets lost. |
 |
DT80MFor Remote ApplicationsThe dataTaker DT80M is an ultra low powered logger with integral 2G/3G modem designed specifically for remote applications. The next step up from the DT82EM, it has more analogue inputs and Modbus master and slave capabilities. |
 |
DT85MFor Remote Applications with High Channel CountsThe DT85M has an integral modem, Modbus master and slave support and can accept up to 48 analogue inputs as standard. Add CEM20 expansion modules and the DT85M can accept up to 960 sensors. |
 |
DT85GMFor All Remote Geotechnical ProjectsThe remote logger with everything. Support for email and SMS, Modbus master and slave and vibrating wire sensors. Up to 48 analogue inputs as standard and expandable to up to 960 sensors. |
 |
DT800When Speed or Precision is EssentialThe DT800 is a robust, stand alone, high speed unit featuring 16 bit resolution, battery backed internal SRAM and ATA Flash memory card support. The DT800 accepts up to 42 analogue inputs and all common measurement types are supported. |
 |
CEM20Channel Expansion ModuleExtending the channel capacity of the latest dataTaker DT80 range of data loggers is made easy by the addition of dataTaker Channel Expansion Modules (CEM20). A dataTaker CEM20 connects to one analogue channel of the dataTaker data logger. Each CEM20 connects 20 universal data logging channels. The Module is suitable for the DT80 range dataTaker data loggers. |
 |
CANgateCANbus, GPS and Data AcquisitionThe dataTaker CANgate is a CAN to ASCII gateway converting CAN (Controlled Area Network) and GPS data to serial data. It has been designed to capture the real-time data available on CAN and GPS networks (e.g. temperatures, RPM, brake/throttle settings, latitude, longitude, speed etc.) and pass that information on to either a dataTaker data logger or host computer system. |
 |
dEX Logger SoftwarePre-installed on All New DT80 Range LoggersdEX datalogger software is an intuitive graphical interface that allows you to configure your data logger, view real-time data in mimics, trend charts or tables and retrieve your historical data for analysis. |
 |
dataTaker LabVIEW DriverVisual Programming for dataTaker Data LoggersThe dataTaker LabVIEW Driver is a comprehensive library of VIs that allows dataTaker range of data loggers to be configured and queried from LabVIEW. |