Delogger 5 and email

For DeLogger4 and DeLogger5 applications

Delogger 5 and email

Postby Starkiller » Fri Sep 16, 2016 5:49 pm

Hi

I bought a DT80 series 11 with Delogger 4pro+5.
I also have the Delogger 4 user manual.

I can not get the email to work, is there a user manual for delogger 5

Image

i downloaded the DT8x user manual but its mosly describes the DEX which my unit does not support?

can you provide some help for setting up the email alarms.

Best regards
Dave
Starkiller
Newbie
 
Posts: 3
Joined: Fri Sep 16, 2016 12:58 am

Re: Delogger 5 and email

Postby Rudy Gunawan » Mon Sep 19, 2016 9:29 am

Hi Dave,

This is the complete alarm syntax for DT80:
ALARMn(test)digitalAction"actionText"[commsProcess]{actionProcesses}

As you can see, Comm process is enclosed by square brackets and it is not supported in DeLogger.
DeLogger only recognise action processes which is enclosed in curly brackets.
And since DeLogger carried a legacy of older dataTaker, syntax declaration still follow the old DT500 {[...]} instead of using the new one {...}

Comm process was introduced in 2011 as part of series 3 which have modem range (firmware 9.00).
So if you would like to send email, you have to upgrade dataTaker firmware to the latest (or at least newer than 9.00).
And have manual channel (select User in DeLogger) to write your syntax.

Best regards,
Rudy Gunawan
Rudy Gunawan
Guru
 
Posts: 416
Joined: Sun Apr 29, 2012 12:28 am

Re: Delogger 5 and email

Postby Starkiller » Wed Sep 21, 2016 11:20 pm

Thanks, I will see if I can get it to work that way. :D

update''''''''''''''

Sorry Its not working for me.

MY DT80 is series 1 and the Delogger 5 is not a pro version
Firmware is 9.16
Starkiller
Newbie
 
Posts: 3
Joined: Fri Sep 16, 2016 12:58 am

Re: Delogger 5 and email

Postby Starkiller » Thu Sep 22, 2016 12:06 am

I think it might be needing the PRO version

Enhanced Alarm functionality
DeLogger 5 Pro can use incoming dataTaker Alarms to
trigger Actions or forward incoming dataTaker Alarms to
the default e-mail system. Individual Alarms can be sent
(using a MAPI compliant mail client) by e-mail to alert
field staff of site conditions and problems.

How would I confirm this and get a Pro version for a Discontinued product?
Starkiller
Newbie
 
Posts: 3
Joined: Fri Sep 16, 2016 12:58 am

Re: Delogger 5 and email

Postby Rudy Gunawan » Wed Sep 28, 2016 9:49 am

Hi Dave,

DeLogger Pro may send email from your PC,
it is not directly dataTaker action for emailing out but a trigger in dataTaker run a PC program for sending email (in this case a small script for accessing Microsoft Outlook is required).
The drawback is a constant connection to dataTaker in order for DeLogger to receive this trigger.

dataTaker itself through unload command (COPYD) is capable to send email to Ethernet connection.
You will need to install new firmware (i.e.: 9.18) and connect this logger to a router (if the site is close to Ethernet network) or 3G router (to use 3G connection).
Then a small setting to setup SMTP server into dataTaker profile.

Best regards,
Rudy Gunawan
Rudy Gunawan
Guru
 
Posts: 416
Joined: Sun Apr 29, 2012 12:28 am


Return to DeLogger

Who is online

Users browsing this forum: No registered users and 1 guest

cron