OnInsert Error

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring

OnInsert Error

Postby Jewmac » Thu Apr 26, 2012 6:20 pm

I have created an oninsert.dxc file that resides on the USB drive that is used to unload the data from site, the files consists of the following:
H SATTN;
COPYD Dest=A: format=csv;
CATTN G

and has worked well until the recent firmware upgrade. Now I get a COPY -> USB Failed(-16), can anyone shed some light on the subject.
Jewmac
Newbie
 
Posts: 2
Joined: Thu Apr 26, 2012 6:10 pm

Re: OnInsert Error

Postby Roger » Fri Apr 27, 2012 7:56 am

Good morning,

A list of the error numbers and their meaning are in the FAQ's http://www.datataker.com/wiki/index.php?title=DT80_Range_FTP_Information

- 16 means could not open destination file (directory or read-only file exists with same name)

Also please note. You should place these commands on one line. As the CopyD command runs in the back ground the Halt and Go commands will execute before the CopyD has finished.

Cheers

Roger
"Don't Panic"
Douglas Adams HHGTTG
Roger
Guru
 
Posts: 271
Joined: Fri Feb 10, 2012 10:38 am


Return to DT82E

Who is online

Users browsing this forum: No registered users and 1 guest

cron