Reset not working

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring

Reset not working

Postby nseii » Fri Jan 19, 2018 4:01 am

I have a DT82E that will not respond to a hard reset by pushing the reset button or a safe mode reset using the same reset button. The display is not showing any text. The sample and Data lights are blinking at the apparent same time 3 or for times a second and the power light is blinking at about the same rate but out of sync with the others.

I have attempt both in case there is something wrong with the program or the IP settings.

I am now replacing the battery.

Is this a good possibility or do you have others to suggest?
nseii
Apprentice
 
Posts: 14
Joined: Wed Sep 19, 2012 2:27 am

Re: Reset not working

Postby nseii » Fri Jan 19, 2018 4:56 am

I tried a different battery and got the same results. However, I did notice that the Attn light was blinking weakly (or quickly) as well and this was repeated upon replacing with the original battery.
nseii
Apprentice
 
Posts: 14
Joined: Wed Sep 19, 2012 2:27 am

Re: Reset not working

Postby Rudy Gunawan » Mon Feb 12, 2018 1:06 pm

Hi nseii,

Please try to enter safe mode by performing a triple push.
It will stop any program from running (blinking of sample/ disk LED).

Best regards,
Rudy Gunawan
Rudy Gunawan
Guru
 
Posts: 461
Joined: Sun Apr 29, 2012 12:28 am

Re: Reset not working

Postby rowdy » Thu Aug 16, 2018 6:00 am

Got it, thanks!
I'm positive it's a right place to learn strategies at austrian.grand.prix.club. I'd do whatever it takes to play there next month. Soon I'll have to find more info.
rowdy
Newbie
 
Posts: 1
Joined: Thu Aug 16, 2018 5:59 am


Return to DT82E

Who is online

Users browsing this forum: No registered users and 1 guest

cron