oninsert issue

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring

oninsert issue

Postby nseii » Fri Oct 23, 2015 6:45 am

I formatted a 4GB Kingston DataTraveler 100 thumb drive (USB 2.0) in a DT82E.

The Datataker read the USB for many minutes before returning front panel control.
prior to formatting it.
It took quite a while to format (no big surprise).
I then entered runjoboninsert"10OCTO15".
This worked and created the appropriate SNxxxxx directory with a job file in it.
I entered removemedia and received a message saying it was safe to remove.
I removed the thumb drive.
I then entered deljob"10octo15".
The job was deleted.
I then inserted the thumb drive.

It read the device for many minutes and then said that it was unrecognised.
I remove the thumb drive and reinserted it. It has been reading it for an hour and 30 minutes so far.

Do you have some direction that you might give me in this regard? Would smaller thumb drives speed up the process and is there any documented problems that apply here?
Posts: 14
Joined: Wed Sep 19, 2012 2:27 am

Re: oninsert issue

Postby Rudy Gunawan » Mon Oct 26, 2015 3:21 pm

Hi nseii,

In normal condition, formatting USB device should make easier for dataTaker to access it.

What is the status of dataTaker when you inserted USB device?
What is the content of ONINSERT.dxc in that USB device?

Did you try to save measurement data into USB device?
Could you check that USB device with your PC for any lost cluster?

Rudy Gunawan
Rudy Gunawan
Posts: 461
Joined: Sun Apr 29, 2012 12:28 am

Re: oninsert issue

Postby lexxaus » Fri Jun 17, 2016 5:44 am

try to reinstal datataker
Posts: 1
Joined: Fri Jun 17, 2016 5:39 am

Re: oninsert issue

Postby bart » Thu Dec 14, 2017 9:40 pm

Thanks! Got it working.
Hey pal, do you want to where to play mobile egaminghall? Know what, it's simple. Thast site provides the slots for everyone, that's why it's possible to win there daily.
Posts: 1
Joined: Thu Dec 14, 2017 9:37 pm

Return to DT82E

Who is online

Users browsing this forum: No registered users and 1 guest