"communication with the logger unsuccessful"

The dataTaker DT85 16 channel general purpose data logger

"communication with the logger unsuccessful"

Postby wldlkdata » Sat Feb 03, 2018 8:00 am

I have taken over a DT85 programmed by someone else. I have connected to the DT85. I need to change some IP addresses as a new router has been installed.
I can't open the command box to change ip addresses.
I am steep on the learning curve here!
I get the message on the attachment.
I have opened port843, still no joy.

Any ideas?
screen shot cant connect command screen.pdf
(47.83 KiB) Downloaded 34 times
Posts: 1
Joined: Sat Feb 03, 2018 7:46 am

Re: "communication with the logger unsuccessful"

Postby Rudy Gunawan » Mon Feb 12, 2018 1:12 pm

Hi wldlkdata,

That usually port 7700 was being blocked.

If you are using USB cable then a background program is using port 80 in your PC.
DTUsb will make a new arrangement to port 81 as well as swapping other port by 1 (including port 7700 into port 7701).

If you are using Ethernet connection, please check any blockage/ firewall setting on port 7700.

Best regards,
Rudy Gunawan
Rudy Gunawan
Posts: 451
Joined: Sun Apr 29, 2012 12:28 am

Return to DT85

Who is online

Users browsing this forum: No registered users and 1 guest